Circuit Board Box Cover
The circuit board box cover is made of 1/32" sheet of balsa. Trace the box and cut the lid with an exacto knife.
Mark the position of the screw holes.
Drill the holes and insert the screws. You might want to drop a little super glue into the screw holes just to make the a little more rigid so the screws will not strip out.
Mark the position of the screw holes.
Drill the holes and insert the screws. You might want to drop a little super glue into the screw holes just to make the a little more rigid so the screws will not strip out.
In the next chapter, we will build and install the strap
