Final Testing and Wrapup of the PiggyBackTrim

Having completed the wiring, now it's time to plug in the USB cable and bring up the driver in Game Controllers. Make sure each pot moves in the proper direction. If the pot moves in the opposite direction, you will need to reverse the two outside wires on the pot. Once all the pots work properly, you can now install the circuit board cover on the piggyBackTrim.

Touch up any blemishes or exposed areas that did not get painted. Small areas can be touched up using a permanent marker.

Hope this inspires you to take on this or a similar project. It's lots of fun and is a very useful device.